"Connection" tab
In the tab Connection you can set parameters that the application will use to get access to the server.
|
Area of connection settings
The area of monitoring settings includes the following:
|
Monitoring server
To configure the monitoring server, you need to input values for IP and Port.
|
IP address
Here the IP-address of the server is indicated. You computer connects to this server to get the monitoring data.
|
Port number
Here the Port number is indicated. You computer connects to this server to get the monitoring data.
|
Internet connection
Here you select the internet connection type: direct access, usage of HTTP Proxy or Socks Proxy.
Important: you don't need to set Proxy parameters if your computer has direct internet connection.
|
Settings of Proxy Server of monitoring
To set a Proxy Server, you need to input the Host name and the values for IP and Port.
|
Host name
Input the Host name used for the identification on the server.
|
IP-address for Proxy Server configuration
Here the IP-address of the Proxy Server is indicated.
|
Port number for Proxy Server configuration
Here the Port number of the Proxy Server is indicated.
|
Authentication
The administrator puts a tick in this checkbox when authentication is needed for connection to the Proxy Server. Then he/she needs to input login and password, click "Apply", and in the future, the application will be connected to this proxy server with these settings.
|
Access settings
It is necessary to set Login and Password that will be used for the connection to the Proxy Server.
|
Settings of Map Proxy Server
To set a Proxy Server, it is necessary to input Host name and Port number.
|
Identification
When you click the button Identification, a procedure is performed to get Proxy Server settings.
|
Use Proxy
If a Proxy Server is already set in the system, then there will be a tick in this checkbox, and the fields Host name and Port will be filled in automatically.
|
"Ok" button
Using this button, you save the changes and close the Settings window.
|
"Apply" button
Using this button, you save the changes, but the Settings window stays active.
|
"Cancel" button
Using this button, you cancel all the changes.
|
"Help" button
Using this button, you open the Instruction for this section.
|
|