«Escort DU-180» is a measuring device providing a continuous monitoring of various tilting mechanisms.
EXCAVATORS WORK CONTROL
Is set to an arm of an excavator and transmits information on its status to a monitoring unit only when actual bucket manipulation is performed, defining the total duration of work and idling, as well as time of the initial and the last bucket manipulation. Thus, you will always know the exact amount of work performed.
TIPPER TRUCK WORK CONTROL
Mounted on the lifting body of a tipper, reporting to the tracker on each rollover of the body, namely, the start and end of the body operation, the amount and duration of the loading/unloading cases.
HARVESTER WORK CONTROL
Mounted on the combine harvester header. The angle meter informs on the lift height of the header, so that you will always know the exact amount of work performed.
• Axises number 3
• Measuring range 0... 180 °
• Measuring error ±1 °
• Power supply voltage range 9... 36 V
• Consumption current 8 mA
• Ingress protection IP67
• Operating temperature - 60... +85 С °
• Temperature nonlinearity ±0.1 % / C °
• Connection interfaces: Discrete (grounding)
-RS-485 300...480 Hz
• Master-Slave mode is available